3M Paint Protection Film Carbon Fiber Texture TIG

-

Two imported film materials are currently available!
3M high-gloss TPU protective film [Maximum scratch and UV resistance] -- for body panels/instruments/lights
3M matte TPU protective film [Fingerprint-resistant and anti-glare] -- for matte body panels/instruments

Please read these important notes before ordering!
Too much foam in the application solution can become trapped under the film and be difficult to squeegee out completely. Avoid adding too much dish soap or liquid soap to greatly improve your chances of a successful installation!
If this is your first DIY film installation, please consider your skills and patience carefully! Watch our installation videos or ask the GOZILLA team for advice first. If you are not confident, pay a professional installer to do it! The film quality is reliable; problems usually come from improper installation!
Concerned about lifting edges? Purchase our optional 3M high-performance adhesion promoter. Before pressing the film down, apply it to the edges of the application surface, allow a few seconds to dry, then attach for a firmer bond! (Avoid transparent parts such as instrument covers! Apply only along the edges, not across the entire surface.)

A word from the owner: With protective film, you really get what you pay for! The market is full of brands and unknown, unbranded films with unbelievably low costs and questionable materials and quality. Would you trust them to protect your ride? They may be cheap, but yellowing, lifting, and cracking after only a few months mean replacing them again. A better film that costs more initially but lasts for years can offer better value! GOZILLA personally tested many brands and ultimately chose the world's leading manufacturer, 3M, to give riders dependable, genuinely tough protective film. We also insist on purchasing each vehicle to develop our own templates, followed by countless tests and revisions before production. This improves template accuracy for every body contour and reduces the risk of failed DIY installations!

Prevent permanent scratches caused by everyday use.
Protect your vehicle against deliberate scratching when parked outside.
Carefully selected world-leading, supercar-grade 3M Pro 4.0 paint protection film.

Premium 3M Pro 4.0 protective film
The sole designated paint protection film brand for 99.9% of the world's automotive manufacturing and aerospace industries.
The only film certified for impact resistance at 300KM/hour.
The world's highest-grade protective film.
Only 3M offers four major warranty assurances for 5 years in Taiwan: no yellowing, cracking, or bubbling!
Premium TPU film up to 8mil thick, with a reinforced anti-yellowing, anti-aging clear coating 5 times thicker. Exceptionally thick and clear, unlike ordinary PU/PVC films that tear easily.
UV-resistant coating up to 0.95mil thick! Industry- and world-leading resistance to yellowing and stains!
Fast self-healing surface technology repairs fine scratches and quickly restores your vehicle's shine.
The nanoscale coating effectively blocks air, moisture, rain, sunlight, insect residue, bird droppings, and other contaminants, while protecting against 80% of road stone impacts.

Use the wet application method.
Clean the application surface thoroughly before installation to prevent dust from becoming trapped under the film. (Use cleaning solvent if necessary, but check that it is safe for the vehicle's surface material first.)
Use neutral dish soap or soapy water at approximately 2~3:1000 (1000ml water + 2~3C.C dish soap or liquid soap). Add a little more soap if needed for lubrication. Note: Excess foam is difficult to squeegee out and may remain under the film!
If you did not purchase a silicone squeegee, wrap an unused membership card or credit card in an absorbent cloth instead.
After installation, gently warm the film with a household hair dryer while using a squeegee as needed to improve conformity.
Remaining moisture gradually disappears after approximately 1-2 weeks in sunlight. Avoid washing the vehicle during this period.
When replacing the film, warm its surface with a hair dryer or heat gun and peel it off gradually to reduce adhesive residue!

Premium 3M 4D textured carbon fiber film (Simply clean the surface with water before application.)
Understated with a distinctive personality.
Excellent outdoor weather resistance.
Use the dry application method to minimize bubbles.
3.5 mm cast film is easy to work with, conforms well, and resists edge lifting.
Micro air channels, glass beads, and pressure-sensitive adhesive make sliding alignment easier while minimizing bubbles.

Use the dry application method.
Clean the application surface thoroughly before installation to prevent dust from becoming trapped under the film.
The application surface must be dry. Moisture can cause the carbon fiber film to lose adhesion!
After installation, warm the edges with a household hair dryer as needed to improve conformity.
Overstretching the carbon fiber film may cause tearing.
Avoid washing the vehicle for approximately 1-2 weeks after application. When washing, avoid directing a water jet at the carbon fiber film.

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

[Before Ordering]
Please carefully confirm the color, size, and other details before placing your order.
Delivery times for most items are confirmed after the order is placed, so some items may be discontinued or may take a long time to ship.
If the manufacturer is out of stock or temporarily unable to deliver, the order will not be placed; no charges will be made for orders that are not placed.
Manufacturers may change specifications or designs without notice, so the packaging or the product itself may differ from the images on the product page. Thank you for your understanding.
If a manufacturer's change in design or specifications prevents the product from performing as expected at the time of order, please contact our customer service for assistance.
Items pass through several shipping stages from order to delivery, so the packaging may be deformed or damaged in transit while the product itself remains intact and fully usable.
[Returns]
To return an item, please submit a request in the Returns section, and keep the product and its original packaging in good condition.
Once we receive your return request, we will arrange for a courier to collect the item as soon as possible.
For returns of defective items not caused by the customer, please submit your request within 7 days of receiving the item.
[Authenticity Guarantee]
For products covered by our authenticity guarantee, if an item is found to be counterfeit and this is confirmed by a court ruling after legal proceedings, customers who purchased it will be compensated 10 times the original purchase price.