Front & Rear Stainless Steel Brake Lines for MT-15 Conventional Fork ABS (20)

※本商品為煞車類商品，屬於高度安全性相關零組件。在您購買、使用、安裝、改裝前必須交由專業人員進行確認，
※安裝時應以專用工具依照使用說明或相關技術資料進行換裝作業。
※因技術經驗不足、購買錯誤商品、錯誤安裝，造成煞車功能不良，影響行駛安全，乃至於發生交通事故，
概與本公司無關，消費者無權要求本公司負擔直接或是間接相關責任。

．Applicable Model: YAMAHA MT15 Conventional Fork ABS (20)
．Product Contents: Front and rear brake lines (4 lines total)
※ Banjo fittings are compatible with OEM specification calipers
．Colors:
　Banjo fitting - Black, Red, Silver
　Nut - Black, Red, Silver
　Sleeve - Black, Red, Silver, Black/Silver, Red/Silver
　Brake line - Black
※ For other color requirements, please contact customer service.
．Material:
　Banjo fitting - 7075 Aerospace-grade aluminum alloy, CNC precision machined
　Hex nut - 7075 Aerospace-grade aluminum alloy
※ Please provide the following personal data in the "Order Remarks":
　1. Are the front/rear master cylinders and calipers aftermarket or OEM? (If aftermarket, please provide brand and model)
　2. Installation position of the aftermarket rear caliper? (S-type underslung on the swingarm or C-type rear-routed underslung)
　3. Length after installing the aftermarket underslung caliper? (Specify OEM length + X cm, e.g., 15~20)
　4. Has the motorcycle been modified with rear-set footpegs?
　5. What is the angle of the rear-set master cylinder?

※ Brake system, the ultimate transmission tool
Stainless steel braided brake lines provide excellent hydraulic transmission and stable braking force. This makes braking power more responsive and effortless. Furthermore, the stainless steel braided material has the advantage of being resistant to wear and rupture, significantly reducing the risk of brake failure caused by line damage.
Inspection point: The crimped joint between the metal brake line and the metal sleeve can become a relative weak point under constant vibration, leading to potential oil leaks or fractures due to long-term bending and compression.
The patented protective sleeve design, combined with the crimped joint, resists direct external impact, strengthens the rigidity of the separate structure, and extends the vibration point onto the main body of the metal brake line, thereby extending the service life of the line and enhancing its appearance.

PTFE Teflon brake line - Close-up view of the actual product
The outer layer is covered with PVC for an extra layer of protection and to allow for variations in appearance color.
The reinforcement layer consists of 304 stainless steel wire braiding to protect the inner tube, allowing it to withstand high-pressure bursting and maintain a low expansion coefficient.
The PTFE Teflon inner tube features resistance to acids and alkalis, corrosion resistance, weather resistance, a low friction coefficient, non-stick properties, and a wide operating temperature range.

※ Precautions for using brake lines
Failure to replace brake fluid for a long period will cause the boiling point to continuously drop, leading to poor braking performance.
If rubber hoses show signs of cracking, hardening, expansion, or blistering, it is recommended to replace them with stainless steel braided brake lines.
Rusted brake line fittings can easily lead to structural weakness and oil leaks; it is recommended to replace them with new stainless steel braided brake lines.
Frequent braking during long descents can put excessive load on the brake system, easily causing brake fade or failure.
Regular maintenance ensures riding quality.

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes before ordering】
Before ordering, please double-check the color, size, and other information you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or temporary unavailability, it will not be processed; no charges will be incurred if the order is not processed.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or the product itself looking different from the images on the product page.
If a manufacturer's unilateral change in product design or specifications prevents the product from performing its intended function as expected at the time of order, please consult our customer service for further processing.
Products undergo multiple shipping processes from order to delivery, so packaging may be deformed or damaged during transit, even if the product itself remains intact and fully functional.
【Return Policy】
If you require return services, please apply in the return section; please keep the product appearance intact and seal it securely in its original packaging.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For non-human-induced defects, please apply for a return within 7 days of receiving the product.
【Authenticity Guarantee】
For products guaranteed to be authentic, if they are found to be suspected counterfeits and are confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.