FITMENT
[要點]
*此商品經訂購後不可取消，退貨和換貨，請注意！
[商品描述]
庫存的後翼必須被拆除。
使用原來的螺栓和緊固件進行安裝。
如果你用外置後懸架替換了懸架，並且在串聯台階上安裝了液壓預載調節器或類似裝置，那么一定要檢查懸架沖程時，軟管和機翼是否會發生干涉。
圖片中的Ohlins在調節器上有一個13毫米的套圈，是偏移的。
*不包括偏移所需的領子、螺釘和螺母。
frp產品和碳素產品是未上漆的產品。
frp（白色凝膠和黑色凝膠）是經過磨光的，可以按照它的光澤度使用，但它是一個必須上漆的產品。
Carbon的表面也有一個透明的膠衣塗層，並被磨成一個有光澤的產品。
這也可以按原樣使用，但如果有必要，應使用聚氨酯透明劑。
[注意]
※商品可能為「未塗裝」樣式，請於訂購時確認需要的款式。若有任何疑問或需要協助，客服系統都歡迎使用查詢。
※商品可能為訂單成立後生產；若訂單成立後有相關取消／修正之情形，本站保有最終決定權。
* 請由具有扎實知識（基於摩托車制造商發布的服務手冊）和技能的機械師或服務車間安裝該產品。如果不能遵循正確的安裝、使用等，我們不能保證產品的質量。請注意，由於制造商的原因，產品規格可能會有變化。請理解。
[商品描述]
[注意]
※商品可能為「未塗裝」樣式，請於訂購時確認需要的款式。若有任何疑問或需要協助，客服系統都歡迎使用查詢。
※商品可能為訂單成立後生產；若訂單成立後有相關取消／修正之情形，本站保有最終決定權。
*FRP products and carbon products are unpainted products.*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Stock rear fenders must be removed.
*The stock bolt and fastener are used for installation.
*If you have changed to an aftermarket rear suspension and a hydraulic pre-load adjuster is installed on the pillion step, be sure to check that the hose does not interfere with the fender when the suspension strokes.
*The Ohlins shown in the image is offset by installing a 13mm collar on the adjuster.
*Collars, screws, and nuts required for offset are not included.
*FRP products and carbon products are unpainted products.
*FRP (white gel, black gel) is buffed and can be used as it is with glossy finish, but it is designed to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5