PAGE TOP

Drive Sprocket (Front)

  • Brand: KITACO
  • Product ID: 530-1444014

List price:

Selling price: 19%OFF

Get 4 Webike point (Around NT$ 4 )
*Can be used as a discount on your next purchase.

Pre-sale Service

Webike point

Once you select the option, estimate delivery time will be displayed.

QTY:

FITMENT

[要點]

● 材質:S45C(高碳鋼)

● 尺寸: 428

● 競賽專用

● 推薦鏈條尺寸/目數﹔428×110L

※ 有關正常齒數,請參閱官方所提供的適用性表

※ 在Grom上安裝 16齒或更多齒數時,需要另外購買加寬型鏈條導鏈板

※ 此外,如果更改為原廠齒數以外的規格,時數表的顯示將會有誤差。 在這種情況下,請安裝時速誤差修正套件

[商品描述]

調整引擎的最佳選擇! 藉由增加鏈條的尺寸來延長保養的週期!

對應428尺寸的齒盤 (14T) 。

齒盤使用S45C(高碳鋼)。

在 Grom使用的情況下,可以使用428尺寸的鏈條,因此支援輸出增加的引擎。
並且透過加大鏈條尺寸,可以提高耐用性及減少保養週期。

[注意]

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

※ 對應428尺寸的後齒盤與鏈條 。

※ 齒盤為消耗品。

※ 以一般行駛時為標準,每行駛約1000km,請對齒盤進行檢查。 (如果齒尖變薄,請更換新齒盤。 透過日常上油保養,齒盤和鏈條的使用壽命大大提高。 )

※ 後齒盤齒數÷前齒盤齒數=減速比。該減速比的數值越大,代表越重視加速,越少則代表越重視尾速。

※ Grom 需要428尺寸的齒盤及鏈條。

※ Super Cub 110、Cross Cub 110的原廠鏈條尺寸為428。

※ Super Cub 110 / Super Cub 110  Pro / Cross Cub 110 (原廠: 14齒), Grom (原廠 (420): 15齒)

【要點】

Material:S45C (High Carbon Steel)
Size:428
for Race
Recommended number of chain links:428X110L

【商品描述】

Material:S45C (High Carbon Steel)
Size:428
for Race
Recommended number of chain links:428X110L

【注意】

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

*It requires 428 size driven sprocket and drive chain for mounting 428 sizes.
*It requires separately on a wide chain guide plate when mounting more than 16T in GROM. It causes errors in speedometer display if you change to another than STD number. Please use speed pulse conversion unit in that case.
*Sprockets are expendable items.
*Please inspect the sprocket every about 1000km run as a rule of thumb for general driving. (Please exchange it for a new one if the tooth tip is thinner. The lubrication of the sprocket and the chain will be dramatically improved by daily lubrication.)
*Rear sprocket T number ÷ Front sprocket T number=Reduction ratio in which the greater the numerical value of this reduction ratio is, the more acceleration-oriented type, the smaller the maximum speed-oriented type.
*GROM is required 428 size drive sprocket and drive chain.
*Super Cub110, Cross Cab110 has a STD chain size of 428.
*Super Cub110/Super Cub110-Pro/Cross Cab110 (STD: 14T), GROM (STD (420): 15T)
*The normal hinges can be found in the application table.
*Please note that the product specification may change due to manufacturer reasons.

QA(5)

1.請問有CROSSCUB110 前齒盤13t 的嗎?

因本站商品眾多,提供您Cross Cub的車型頁面 https://www.webike.tw/mt/6456 您可以使用"齒盤"的關鍵字搜尋是否有13齒的前齒盤商品喔!

2.2021年 三代 五檔 msx 可以使用嗎?

可以使用,但請注意相關的改裝也需要一併更改

3.哥您好,請問此產品適用於CT125(JA65)車上嗎? 感謝您的回覆

適用喔

4.三代五檔msx 可以用嗎?

不行喔

5.2021年honda msx grom jc92可以用嗎?

不行喔

REVIEWS FOR THIS PRODUCT(4)

4.8/5

5星
3則
4星
1則
3星
0則
2星
0則
1星
0則

優良 2026/03/13

by蒙其D魯夫

原廠420.改裝428品質優優異,解決需要經常調整鏈條的困擾,耐用度提升,雖然沒有原本420輕快但是C/P值提升不少

msx改428 前後齒盤 2024/03/26

byKuo

還未安裝上車 經公司組長推薦KITACO 428 15T前齒盤 跟 35T後齒盤來用於MSX SF車上會有不錯的加速反應 看到Webike有優惠 毫不猶豫直接下訂

MSX 前齒盤(425) 2018/12/25

byreko

原廠為420鏈條規格,在平日維修檢查保養上,因感於需經常性檢查及調整鏈條鬆緊度,故將傳動系統改裝此425規格,較不需經常性調整.

kitaco 428前齒 2018/05/30

by阿良

由於msx125原廠使用420鏈條,換過油封鏈之後還是覺得不夠用,所以動了改428鏈條的念頭,找來找去還是選擇知名大廠的產品,才能令人安心。