PAGE TOP

[K TOUR] USB Power Supply Kit (2-Ports)

  • Brand: KITACO
  • Product ID: 80-757-14700

List price: TWD 1,698

Selling price: TWD 1,494 12%OFF

Get 30 Webike point (Around NT$ 30 )
*Can be used as a discount on your next purchase.

Pre-sale Service

TWD 1494.000000

30 Webike point

Once you select the option, estimate delivery time will be displayed.

QTY:
Webike STOCK RECOMMENDATIONS - FAST SHIP

FITMENT

[要點]

【USB 數量】1,000 安培 / 2個

【最大出力】2,000 安培 (單USB 使用情況下)

【特點】

・即插即用的插座

・防水

・內建LED顯示燈 (藍色)

【商品組合】

・車種専用電源配線 (配線位置:大燈殼内)

・專用連接配線 (日規專用)

・USB 充電器專用固定座

【介面配置】2 個USB

【輸入/輸出電壓】DC12V/DC5V:最大2A(單USB 使用情況下)

【車種使用規格】日規HONDA CT125 & 日規JA55車系

安裝說明書(日文)

[商品描述]

只需中斷連接器,即可取出 USB 電源!

這是一種車輛限定的類型,附有專用線束,用於2埠的USB 電源。

確保充電所需的電源,如手機等生活必需品!

因為它是限定車種專用設計,只能連接到該套件指定的耦合器中,並且安裝在主電源旁邊的支架附件上,以連接到USB接口。

● 使用附件電源 (ACC+)。 當鑰匙打開時,內置的LED燈(藍色)會亮起。

 

● USB 電源套件附有一個支架,除了特定位置外,您可以安裝置到您選擇的位置。

(可安裝於Φ22.2、Φ25.4的把手上)

 

● 電源取出線束類型4

只需將端子連接到大燈殼內的指定耦合器即可。

[注意]

※ 本產品專為 12V 車輛設計。 除 12V 車輛外,不要用於其他車輛。
※ 由於不是完全防水的,洗車、雨天時請勿使用。 此外,不使用時,請務必蓋上隨附的橡膠蓋。
※ 由於溫度變化等原因,本體(橡膠蓋)內部可能會發生結露現象。 避免溫度變化劇烈的地方(引擎周圍),並經常檢查、清除水滴。 (請用空氣除塵器、吸塵器等去除水滴。 可能導致麻煩。)
※ 請勿用於連接高耗電的產品(如放大器、壓縮機等)。
※ 商品可能會因為製造商的設計或是規格變更而有所不同。
※適用日規JA65,泰規無法安裝

【要點】


[USB port] 1.000mA 2pcs
[DC5V Max. output] 2.000mA (when only 1 port is used)
[Specification]
・Coupler on
・Drip-proof specification
・Built-in LED (Blue)
[Component]
・Power supply harness for exclusive use of models (power supply extraction point: Inside headlight case)
・Mark Tube (Kitako Original)
・USB bracket for handlebar (used when handlebar is installed)
[Interface] USB / 1.1 x 2 port
[Input / Output voltage] DC12V / DC5V: Maximum 2A (when using 1 port)
[ACC+] Accessory power
[GND-] Ground

【商品描述】


[USB port] 1.000mA 2pcs
[DC5V Max. output] 2.000mA (when only 1 port is used)
[Specification]
・Coupler on
・Drip-proof specification
・Built-in LED (Blue)
[Component]
・Power supply harness for exclusive use of models (power supply extraction point: Inside headlight case)
・Mark Tube (Kitako Original)
・USB bracket for handlebar (used when handlebar is installed)
[Interface] USB / 1.1 x 2 port
[Input / Output voltage] DC12V / DC5V: Maximum 2A (when using 1 port)
[ACC+] Accessory power
[GND-] Ground

【注意】

*Fits to domestic specification vehicles only.
*This product is designed for 12V vehicles only.Do not use this product for vehicles other than 12V vehicles.
*It is not completely waterproof.Do not use in vehicle washes or in the rain.When not in use, be sure to attach the attached rubber cap.
*Dew condensation may occur inside the main body (rubber cap) due to temperature changes.Avoid places where the temperature changes rapidly (around the engine), and check frequently to remove water droplets.(Remove water droplets with an air duster or vacuum cleaner.) It may cause trouble.
*Do not use for connection of products with high power consumption and current (amplifier, compressor, etc.).
*There may be changes in product specifications due to the manufacturer's reasons.

REVIEWS FOR THIS PRODUCT(0)

0/5