FITMENT
[要點]
※本商品為無土除套件相關商品，購買前請先確認安裝後牌照角度與位置是否與車輛信號指示燈具(尾燈、煞車燈、方向燈……)、排氣管出口以及反光片有阻擋干涉等狀態。
[Material] Steel[Color] Black
[Components]
・License plate lamp
・Slim reflector
[商品描述]
[Material] Steel
[Color] Black
[Components]
・License plate lamp
・Slim reflector
[Color] Black
[Components]
・License plate lamp
・Slim reflector
[注意]
*This kit relocates the stock blinkers and license plate under the tail lamps.Keep the removed mudguard support in a safe place.
*When this product is installed, the overall length will not fit within a certain range (approx. -30mm).Please contact your local municipality and file a modification declaration.
*The angle is just right, so if the angle is not enough due to individual differences, please adjust the height by inserting washers or other parts in the front fixing section.
*Because of the design concept of this product, which is to make the tail lamps as close to the exterior of the organic LED tail lamps as possible, it may not be possible to mount odd-shaped license plates with characters or icons sticking out vertically.Be sure to check the size.
*The clearance between the engine and the fender is very small because of the emphasis on style.When driving with heavy weight, such as two passengers, there is a possibility that the fenders may come in contact with the bike if the bike is subjected to a large impact.It is recommended to put guard tape on the tip of the reflector to prevent scratches.
*The number angle must be within 40 degrees from the vertical plane according to the revised Road Trucking bike Law.
*License plate bases should not be used in combination with license plate bases, as this will increase metal fatigue when considering the load of the parts.(The photo shows the image of the license plate.)
*The OEM LED rear blinker has several vertical slits on the blinker bracket to prevent failure due to the design concept of the installation position and impact from riding.Therefore, when using the stock LED rear blinkers, both blinkers will bow toward the arrowhead when the rear view is viewed flat.If you are concerned about the design, please consult with your dealer and consider replacing the blinkers with lightweight blinkers that have straight blinker brackets.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*When this product is installed, the overall length will not fit within a certain range (approx. -30mm).Please contact your local municipality and file a modification declaration.
*The angle is just right, so if the angle is not enough due to individual differences, please adjust the height by inserting washers or other parts in the front fixing section.
*Because of the design concept of this product, which is to make the tail lamps as close to the exterior of the organic LED tail lamps as possible, it may not be possible to mount odd-shaped license plates with characters or icons sticking out vertically.Be sure to check the size.
*The clearance between the engine and the fender is very small because of the emphasis on style.When driving with heavy weight, such as two passengers, there is a possibility that the fenders may come in contact with the bike if the bike is subjected to a large impact.It is recommended to put guard tape on the tip of the reflector to prevent scratches.
*The number angle must be within 40 degrees from the vertical plane according to the revised Road Trucking bike Law.
*License plate bases should not be used in combination with license plate bases, as this will increase metal fatigue when considering the load of the parts.(The photo shows the image of the license plate.)
*The OEM LED rear blinker has several vertical slits on the blinker bracket to prevent failure due to the design concept of the installation position and impact from riding.Therefore, when using the stock LED rear blinkers, both blinkers will bow toward the arrowhead when the rear view is viewed flat.If you are concerned about the design, please consult with your dealer and consider replacing the blinkers with lightweight blinkers that have straight blinker brackets.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5