PAGE TOP

Drive Sprocket (Front)

  • Brand: KITACO
  • Product ID: 530-1444015

List price:

Selling price: 0%OFF

Get 24 Webike point (Around NT$ 24 )
*Can be used as a discount on your next purchase.

Pre-sale Service

Webike point

Once you select the option, estimate delivery time will be displayed.

QTY:

FITMENT

[要點]

● 材質:S45C(高碳鋼)

● 尺寸: 428

● 競賽專用

● 推薦鏈條尺寸/目數﹔428×110L

※ 有關正常齒數,請參閱官方所提供的適用性表

※ 在Grom上安裝 16齒或更多齒數時,需要另外購買加寬型鏈條導鏈板

※ 此外,如果更改為原廠齒數以外的規格,時數表的顯示將會有誤差。 在這種情況下,請安裝時速誤差修正套件

[商品描述]

調整引擎的最佳選擇! 藉由增加鏈條的尺寸來延長保養的週期!

對應428尺寸的齒盤 (14T) 。

齒盤使用S45C(高碳鋼)。

在 Grom使用的情況下,可以使用428尺寸的鏈條,因此支援輸出增加的引擎。
並且透過加大鏈條尺寸,可以提高耐用性及減少保養週期。

[注意]

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

※ 對應428尺寸的後齒盤與鏈條 。

※ 齒盤為消耗品。

※ 以一般行駛時為標準,每行駛約1000km,請對齒盤進行檢查。 (如果齒尖變薄,請更換新齒盤。 透過日常上油保養,齒盤和鏈條的使用壽命大大提高。 )

※ 後齒盤齒數÷前齒盤齒數=減速比。該減速比的數值越大,代表越重視加速,越少則代表越重視尾速。

※ Grom 需要428尺寸的齒盤及鏈條。

※ Super Cub 110、Cross Cub 110的原廠鏈條尺寸為428。

※ Super Cub 110 / Super Cub 110  Pro / Cross Cub 110 (原廠: 14齒), Grom (原廠 (420): 15齒)

【要點】


Material: S45C (High carbon steel)
Size: 428
Race only
Recommended number of chain links: 428 x 110L

【商品描述】


Material: S45C (High carbon steel)
Size: 428
Race only
Recommended number of chain links: 428 x 110L

【注意】

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

*428 size drive sprocket and drive chain are required to install 428 size.
*When 16T or more is installed on Grom, a wide chain guide plate is required separately.If you change the license of knives to other than the stock number, there will be an error in the speedometer display.In this case, please use the speed pulse conversion unit.
Sprockets are consumable items.
*Inspect the sprockets every 1000km as a guide for general driving.(If the tip of the tooth has become thin, replace it with a new one.The life of the sprocket and chain can be greatly improved by daily lubrication.)
*Rear sprocket T number ÷ Front sprocket T number = Reduction ratioThe higher the value of this reduction ratio, the more emphasis is placed on acceleration, and the lower the value, the more emphasis is placed on maximum speed.
*The Grom requires a 428 size drive sprocket and drive chain.
*The stock chain for Super Cub 110 and Cross Cub 110 is 428 size.
*Super Cub 110 / Super Cub 110-Pro / Cross Cub 110 (Stock: 14T), Grom (Stock (420): 15T)
*Please refer to the compatibility chart for the stock number of knives.
*There may be changes in product specifications due to the manufacturer's reasons.

QA(7)

1.請問有CROSSCUB110 前齒盤13t 的嗎?

因本站商品眾多,提供您Cross Cub的車型頁面 https://www.webike.tw/mt/6456 您可以使用"齒盤"的關鍵字搜尋是否有13齒的前齒盤商品喔!

2.請問此款 428 前齒盤是否適用於三代五檔的 HONDA MSX GROM?

A: 此商品不適用於三代五檔 MSX GROM。

3.請問網站圖示標註 420 內幅為 6.35mm,而 428 內幅為 7.94mm,若要購買 428 規格應如何選擇?

A: 如欲購買 428 齒盤,請直接於選單下單所需的齒數即可。

4.2021年 三代 五檔 msx 可以使用嗎?

可以使用,但請注意相關的改裝也需要一併更改

5.哥您好,請問此產品適用於CT125(JA65)車上嗎? 感謝您的回覆

適用喔

6.三代五檔msx 可以用嗎?

不行喔

7.2021年honda msx grom jc92可以用嗎?

不行喔

REVIEWS FOR THIS PRODUCT(0)

0/5