GH05-2 Easy Detach Grip Heater for Fall/Winter, Wrap-Around Cord Attachment for Removal in Spring/Summer

[Type] Wrapping type
[Power consumption] 12.15W

[Type] Wrapping type
[Power consumption] 12.15W

*The life of the bike battery and electrical system will be extended if the bike is sufficiently ready for startup after the engine has been started, idled, and riden 2-3 km.
*Since motorcycles are not power generators, do not use them recklessly. Instead, use the surplus electrical power of the motorcycle gradually. This approach is gentle on the motorcycle.Also, please consider the use of a handlebar cover to increase the overall effect of thermal protection and warmth under low power use.Since the wind blows on your hands and they get cold, if you can physically block the wind, your hands will be less likely to get cold and heat will accumulate.
*With the recent trend toward expansion of electrical components, we have heard from many customers that only the grip heater option is not enough.Motorcycles move by burning fuel, and their explosive power is also used to generate electricity, powering various electrical equipment. Therefore, when considering installation, it is important to first discuss with your bike shop about the essential and preferable options for your bike's electrical accessories. We kindly ask for your careful consideration after consulting with the shop before proceeding with the installation.
*Full cowl bikes and scooters may require more labor and may require a longer period of time since the wiring cowl will be threaded during installation.Also, since it is an electrical component, the location for supplying electricity may vary depending on the bike for the optional coupler or surplus wiring. Even if the grip length that can be installed is long, if the wiring work for supplying power is technically difficult and cannot be installed during storage, it could be a problem.Before proceeding, please consult with the bike shop in advance and consider it.
*Please check the condition and grounding method of the stock parts carefully for the compatible accessory branching harnesses, and consider the possibility that the power harness length may not reach the grips depending on the location of the harness.Many people have trouble with the grounding of line-only branch harnesses, so we strongly recommend that you consult a professional if you have any questions.
*However, if it is difficult to remove all the cowl nails, install, and modify the wiring, it may take longer than expected and you may not be able to use the bike for several days. Please consult with your dealer or custom shop first.In addition, since this product is activated by an ON/OFF switch, if you leave the switch ON and leave the bike unattended, the battery may run out and the bike engine may not start.
*This is a common case for bikes under 125cc, but if installing it on a bike with low battery capacity and power generation, not only will it not warm up, but the battery will run out.(The same will apply to non-Japanese made batteries and degraded batteries.)
*This product cannot be used for SUZUKI vehicles with low power generation or HONDA vehicles with batteries of less than 7S.
*For YAMAHA, it can be used on the vehicles with 4B5 or higher batteries.Also, even if you can use it, the power supply will be turned off when the motorcycle drops below 12V at idling or low RPM.
*Sometimes, depending on the individual difference of each bike, the power supply is cut off due to insufficient voltage when the bike is turned on to full power.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.